Close
Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 25
  1. #11
    Senior Member BestRadarDetectors's Avatar
    Join Date
    Oct 2013
    Location
    NJ
    Posts
    4,503
    Thanks Given
    472
    Thanked 5,550 Times in 2,134 Posts
    Quote Originally Posted by BestRadarDetectors View Post
    Found the thread you were probably looking for. Not sure if it works...

    For the 9 button version.

    Turn on the gun.

    1. Press the “Sen” key.
    2. Immediately, press the “SPEAKER” key.
    3. Immediately, press two keys at the same time. The two keys are the “LOC/REL” and the “SQL”

    That should get you into the internal menu. Be careful here as every button has a different function in the radar.

    4. Now you can toggle between KPH and MPH by hitting the “SQUELCH” button.
    5. When you have what you desire, PULL THE TRIGGER! That locks the value in



    For the 7 button version

    1. Remove the 4 screws holding on the top plastic cover.

    2. Carefully separate the top cover from the unit.

    3. With the unit facing forward as you would use the radar, locate the two jumper pins on the left circuit board. They are at the front of the unit, on the top.

    4. Short the two pins together and power on the unit, then remove the jumper.

    5. The LCD should read one of the following SEn 13, SEn 14, SEn 15, or SEn 16. You are now in the setup menu.

    6. Press the "SQ" key to toggle between KPH and MPH. When KPH mode is active, the letter M (presumably Metric) will be displayed on the top right of the screen.

    7. Power off the unit. Your settings have been saved.
    Let us know if these instructions above work. And here is the Manual.... Stalker lidarmanual.pdf
    Need Help Choosing a Radar Detector for your needs? Visit our website: http://www.bestradardetectors.net, Send us a PM or call us at 1-888-229-7594
    Before looking at an Escort Radar Detector you should really check out Uniden Detectors.. Uniden R1 & R3 are the best performing radar detectors for the money.

  2. The Following 2 Users Say Thank You to BestRadarDetectors For This Useful Post:

    gowfo (06-27-2018), melbVt (05-09-2014)

  3. #12
    Moderator winterbrew's Avatar
    Join Date
    Nov 2013
    Location
    Western Australia
    Posts
    1,803
    Thanks Given
    1,850
    Thanked 1,697 Times in 929 Posts
    Quote Originally Posted by melbVt View Post
    Okay so far thankyou for all your input, BRD Shane & RadarRob!
    Strange on RDF well I cant snoop into the site I found this in google clearly stating there is a how to change from KPH to MPH on RDF
    My understanding is that the above can only be done on the Euro models originally sold in km/h, and also the Gen I doesn't have the button that you need to press in the instructions that BRD posted. As Rob said, I thought the USA models cannot be converted by the user, although I don't have a Gen II to try the button combination to see if it works, and I don't know if I want to risk trying the 7 button instructions
    2 x ALPriority (Quint) with STi-R+ and BT/HiFi/GPS integration | V1C (sold) | Bel RX65 S7 | 2015 Intl Redline Pro-A (sold) | Uniden R3 | Uniden LRD950 (sold) | Stalker Lidar | UltraLyte LRB | Kustom Raptor RP-1 2 x K band, 1 x Ka band antennas | Decatur Genesis-II K band |

  4. The Following User Says Thank You to winterbrew For This Useful Post:

    melbVt (05-09-2014)

  5. #13
    Senior Member
    Join Date
    Nov 2013
    Location
    NYB
    Posts
    313
    Thanks Given
    511
    Thanked 174 Times in 106 Posts
    Thanks BRD you pointed me in correct direction Its was done by pressing a combination of just pressing buttons For real! I tried power on Time/Distance then Max then pulled trigger then power off then kept trying different combo's and wow it's now in KPH and stupid silly me wasn't alert to combination pressed,
    So yes somehow Ive changed it as last night it was in MPH and now i shot a car and now it reads Km ,
    Ive been in contact with the stalker service centre they can certify/ and update to latest release of firmware to stop the E03 msg
    Last night I detected 1 jammer only over 2hrs of use!
    My Bel Stir+ I only have the radar laser antenna plugged in no Z4's or shifter pro's and last night I got alert from 1200FT away and its behind mesh!
    Thanku RadarRob, BRD , Winterbrew I keep on the lookout for info etc ,
    I LOVE IT ,
    GONE SHOOTING BACK SOON !

    Quote Originally Posted by winterbrew View Post
    My understanding is that the above can only be done on the Euro models originally sold in km/h, and also the Gen I doesn't have the button that you need to press in the instructions that BRD posted. As Rob said, I thought the USA models cannot be converted by the user, although I don't have a Gen II to try the button combination to see if it works, and I don't know if I want to risk trying the 7 button instructions

  6. The Following User Says Thank You to melbVt For This Useful Post:

    winterbrew (05-08-2014)

  7. #14
    Moderator winterbrew's Avatar
    Join Date
    Nov 2013
    Location
    Western Australia
    Posts
    1,803
    Thanks Given
    1,850
    Thanked 1,697 Times in 929 Posts
    Good news - I might open up my Gen I and have a play now
    2 x ALPriority (Quint) with STi-R+ and BT/HiFi/GPS integration | V1C (sold) | Bel RX65 S7 | 2015 Intl Redline Pro-A (sold) | Uniden R3 | Uniden LRD950 (sold) | Stalker Lidar | UltraLyte LRB | Kustom Raptor RP-1 2 x K band, 1 x Ka band antennas | Decatur Genesis-II K band |

  8. The Following User Says Thank You to winterbrew For This Useful Post:

    melbVt (05-09-2014)

  9. #15
    Senior Member
    Join Date
    Nov 2013
    Location
    NYB
    Posts
    313
    Thanks Given
    511
    Thanked 174 Times in 106 Posts

    KPH FAILED My mistake , Please read

    Quote Originally Posted by winterbrew View Post
    Good news - I might open up my Gen I and have a play now
    Sorry to get you all excited FAIL no luck LOL! It is still in MPH yet I can see KPH when I turn it on, I tagged a cars in 60KM zone and was averaging 35 to 45MPH = 60 to 70MPH

    Now I tried taking photo to show difference as I don't have squelch etc found a good pic of th3e same keys to give everyone a clearer Idea,
    I think I mite need open it up and try the pin thing ,
    Will sus it out as in the box came sheet paper saying it has Metric operation Setup menu selectable,Name:  VersionComparios002A.jpg
Views: 268
Size:  31.6 KB
    Last edited by melbVt; 05-08-2014 at 11:07 PM.

  10. The Following User Says Thank You to melbVt For This Useful Post:

    winterbrew (05-08-2014)

  11. #16
    Moderator winterbrew's Avatar
    Join Date
    Nov 2013
    Location
    Western Australia
    Posts
    1,803
    Thanks Given
    1,850
    Thanked 1,697 Times in 929 Posts
    melbVt do you have the Gen I like as shown in the picture above, or the Gen II with gold buttons (and the extra button) ?

    Mine's a Gen I as per the picture above
    2 x ALPriority (Quint) with STi-R+ and BT/HiFi/GPS integration | V1C (sold) | Bel RX65 S7 | 2015 Intl Redline Pro-A (sold) | Uniden R3 | Uniden LRD950 (sold) | Stalker Lidar | UltraLyte LRB | Kustom Raptor RP-1 2 x K band, 1 x Ka band antennas | Decatur Genesis-II K band |

  12. The Following User Says Thank You to winterbrew For This Useful Post:

    melbVt (05-09-2014)

  13. #17
    Moderator winterbrew's Avatar
    Join Date
    Nov 2013
    Location
    Western Australia
    Posts
    1,803
    Thanks Given
    1,850
    Thanked 1,697 Times in 929 Posts
    Here's a vid from one of the RDF guys on how to change the EU km/h version to measure in mph ;

    2 x ALPriority (Quint) with STi-R+ and BT/HiFi/GPS integration | V1C (sold) | Bel RX65 S7 | 2015 Intl Redline Pro-A (sold) | Uniden R3 | Uniden LRD950 (sold) | Stalker Lidar | UltraLyte LRB | Kustom Raptor RP-1 2 x K band, 1 x Ka band antennas | Decatur Genesis-II K band |

  14. The Following User Says Thank You to winterbrew For This Useful Post:

    melbVt (05-08-2014)

  15. #18
    Senior Member
    Join Date
    Nov 2013
    Location
    NYB
    Posts
    313
    Thanks Given
    511
    Thanked 174 Times in 106 Posts
    Quote Originally Posted by winterbrew View Post
    melbVt do you have the Gen I like as shown in the picture above, or the Gen II with gold buttons (and the extra button) ?

    Mine's a Gen I as per the picture above

    Thats is exactly the same as mine yes it must be a Gen 1

  16. The Following User Says Thank You to melbVt For This Useful Post:

    winterbrew (05-08-2014)

  17. #19
    Senior Member
    Join Date
    Nov 2013
    Location
    NYB
    Posts
    313
    Thanks Given
    511
    Thanked 174 Times in 106 Posts
    #3 CHEERs for winterbrew! CHEERS Cheers Im in KPH
    Last edited by melbVt; 05-09-2014 at 12:05 AM.

  18. The Following User Says Thank You to melbVt For This Useful Post:

    winterbrew (05-09-2014)

  19. #20
    Moderator winterbrew's Avatar
    Join Date
    Nov 2013
    Location
    Western Australia
    Posts
    1,803
    Thanks Given
    1,850
    Thanked 1,697 Times in 929 Posts
    Quote Originally Posted by melbVt View Post
    #3 CHEERs for winterbrew! CHEERS Cheers Im in KPH
    So just to summarise;

    You've got a Gen I with flat buttons (no menu button), as per your post above
    You followed the YouTube video, but pushed the 'Time/Dist' button on the Gen I, instead of the 'menu' button on the Gen II in the key press sequence
    You're now in km/h

    2 x ALPriority (Quint) with STi-R+ and BT/HiFi/GPS integration | V1C (sold) | Bel RX65 S7 | 2015 Intl Redline Pro-A (sold) | Uniden R3 | Uniden LRD950 (sold) | Stalker Lidar | UltraLyte LRB | Kustom Raptor RP-1 2 x K band, 1 x Ka band antennas | Decatur Genesis-II K band |

  20. The Following User Says Thank You to winterbrew For This Useful Post:

    melbVt (05-09-2014)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •