Close
Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Moderator winterbrew's Avatar
    Join Date
    Nov 2013
    Location
    Western Australia
    Posts
    1,803
    Thanks Given
    1,850
    Thanked 1,697 Times in 929 Posts

    AL Priority in action videos

    If anyone want's to check out the ALP in action, please feel free to browse my YouTube channel, which currently has 19 videos of the ALP in action ;

    http://www.youtube.com/user/jonctr/videos

    Due to every day occurence of the VPS in our area, they're all of the Vitronic PoliscanSpeed automated lidar camera - I've yet to be targeted with a handheld outside of testing

    19 encounters in just less than four months since installation
    2 x ALPriority (Quint) with STi-R+ and BT/HiFi/GPS integration | V1C (sold) | Bel RX65 S7 | 2015 Intl Redline Pro-A (sold) | Uniden R3 | Uniden LRD950 (sold) | Stalker Lidar | UltraLyte LRB | Kustom Raptor RP-1 2 x K band, 1 x Ka band antennas | Decatur Genesis-II K band |

  2. The Following 8 Users Say Thank You to winterbrew For This Useful Post:

    BestRadarDetectors (11-10-2013), curmudgeon (11-11-2013), deano (11-11-2013), dinkydi (11-10-2013), Firemedic (11-10-2013), Radarrob (11-10-2013), RedRocket (11-11-2013), Yellowcab (11-10-2013)

  3. #2
    Member Firemedic's Avatar
    Join Date
    Nov 2013
    Posts
    67
    Thanks Given
    17
    Thanked 31 Times in 20 Posts
    Great videos

    Thanks.

  4. #3
    Senior Member
    Join Date
    Nov 2013
    Posts
    1,217
    Thanks Given
    655
    Thanked 1,018 Times in 503 Posts
    here is one of WB tests with my PL2 ....also on the day we had the stalker and LRB... WB will be able to fill you guys in on the guns software but all 3 guns where JTG and JFG

    Last edited by deano; 11-11-2013 at 04:36 PM.

  5. The Following 6 Users Say Thank You to deano For This Useful Post:

    BestRadarDetectors (11-11-2013), curmudgeon (11-11-2013), dinkydi (11-11-2013), RedRocket (11-11-2013), Salty (11-12-2013), winterbrew (11-11-2013)

  6. #4
    Senior Member BestRadarDetectors's Avatar
    Join Date
    Oct 2013
    Location
    NJ
    Posts
    4,503
    Thanks Given
    472
    Thanked 5,550 Times in 2,134 Posts
    Quote Originally Posted by deano View Post
    here is one of WB tests with my PL2 ....also on the day we had the stalker and LRB... WB will be able to fill you guys in on the guns software but all 3 guns where jtg and JTG
    Thanks for sharing. Its our first customer AL Priority video on the site.
    Thanks Again for participating.

    Tom
    Need Help Choosing a Radar Detector for your needs? Visit our website: http://www.bestradardetectors.net, Send us a PM or call us at 1-888-229-7594
    Before looking at an Escort Radar Detector you should really check out Uniden Detectors.. Uniden R1 & R3 are the best performing radar detectors for the money.

  7. #5
    Senior Member dinkydi's Avatar
    Join Date
    Nov 2013
    Location
    cosmos
    Posts
    3,739
    Thanks Given
    4,432
    Thanked 1,222 Times in 911 Posts
    what would be good to see half way through a test, the jammers get switched off and back on again,

  8. #6
    Senior Member RedRocket's Avatar
    Join Date
    Nov 2013
    Location
    North America
    Posts
    2,057
    Thanks Given
    1,081
    Thanked 1,543 Times in 846 Posts
    I've experienced how difficult it can be to hold "steady" on the target when it's such a windy day,isn't it!
    You did quite well for the conditions.

  9. #7
    Moderator winterbrew's Avatar
    Join Date
    Nov 2013
    Location
    Western Australia
    Posts
    1,803
    Thanks Given
    1,850
    Thanked 1,697 Times in 929 Posts
    Front heads (2No.) are 600mm (23") apart, angled out 10 degrees for Vitronic PoliscanSpeed.

    Rear heads (3No.) are 600mm apart (outer head to outer head), angled 29 degrees out for PoliscanSpeed, with centre head between the two outer heads over the licence plate, at 0 degrees (straight ahead)

    For those interested, the Stalker firmware was A 5.7 SUP, and the LRB was 3.02 (not shown in above video)
    2 x ALPriority (Quint) with STi-R+ and BT/HiFi/GPS integration | V1C (sold) | Bel RX65 S7 | 2015 Intl Redline Pro-A (sold) | Uniden R3 | Uniden LRD950 (sold) | Stalker Lidar | UltraLyte LRB | Kustom Raptor RP-1 2 x K band, 1 x Ka band antennas | Decatur Genesis-II K band |

  10. The Following 2 Users Say Thank You to winterbrew For This Useful Post:

    curmudgeon (11-12-2013), dinkydi (11-12-2013)

  11. #8
    Senior Member BestRadarDetectors's Avatar
    Join Date
    Oct 2013
    Location
    NJ
    Posts
    4,503
    Thanks Given
    472
    Thanked 5,550 Times in 2,134 Posts
    Quote Originally Posted by winterbrew View Post
    Front heads (2No.) are 600mm (23") apart, angled out 10 degrees for Vitronic PoliscanSpeed.

    Rear heads (3No.) are 600mm apart (outer head to outer head), angled 29 degrees out for PoliscanSpeed, with centre head between the two outer heads over the licence plate, at 0 degrees (straight ahead)

    For those interested, the Stalker firmware was A 5.7 SUP, and the LRB was 3.02 (not shown in above video)
    While I know the AL Priority has the widest angle protection I am happy to see you still getting great performance with them positioned so far out at close to 30%. That single rear center head is doing its job well.
    Need Help Choosing a Radar Detector for your needs? Visit our website: http://www.bestradardetectors.net, Send us a PM or call us at 1-888-229-7594
    Before looking at an Escort Radar Detector you should really check out Uniden Detectors.. Uniden R1 & R3 are the best performing radar detectors for the money.

  12. #9
    Moderator winterbrew's Avatar
    Join Date
    Nov 2013
    Location
    Western Australia
    Posts
    1,803
    Thanks Given
    1,850
    Thanked 1,697 Times in 929 Posts
    Yes, the two outers are purely for rear Poliscan protection.

    I did however, draw it out in AutoCad fully scaled to ensure there were no gaps in the coverage, particularly in the rear when shot from behind at 10m (33') from a typical rear Poliscan setup shooting from the verge at 35deg (imported and scaled from Google Earth). Beyond about 10m, I should have some degree of overlapping protection from the rear heads due to the beam divergence.

    10 deg out on the front is about the maximum, otherwise you open up a small channel of non-coverage at 0 deg straight ahead in front of the licence plate (depends on the size of the car and mounting positions of course)
    2 x ALPriority (Quint) with STi-R+ and BT/HiFi/GPS integration | V1C (sold) | Bel RX65 S7 | 2015 Intl Redline Pro-A (sold) | Uniden R3 | Uniden LRD950 (sold) | Stalker Lidar | UltraLyte LRB | Kustom Raptor RP-1 2 x K band, 1 x Ka band antennas | Decatur Genesis-II K band |

  13. #10
    Senior Member RedRocket's Avatar
    Join Date
    Nov 2013
    Location
    North America
    Posts
    2,057
    Thanks Given
    1,081
    Thanked 1,543 Times in 846 Posts
    Quote Originally Posted by winterbrew View Post
    Yes, the two outers are purely for rear Poliscan protection.

    I did however, draw it out in AutoCad fully scaled to ensure there were no gaps in the coverage,- - -

    10 deg out on the front is about the maximum, otherwise you open up a small channel of non-coverage at 0 deg straight ahead in front of the licence plate (depends on the size of the car and mounting positions of course)
    Hey wb,have you seen the IR video of the AL-P Sensor that shows the beam divergence displayed in actual angle of spread in "degrees" ?

    Scroll down to near the bottom of the page:
    http://www.raletc.org/2013_10_01_archive.html?m=0
    Last edited by RedRocket; 11-12-2013 at 03:19 PM.

  14. The Following 2 Users Say Thank You to RedRocket For This Useful Post:

    curmudgeon (12-08-2013), dinkydi (12-07-2013)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •