Close
Results 1 to 6 of 6
  1. #1
    Junior Member
    Join Date
    Dec 2018
    Posts
    4
    Thanks Given
    0
    Thanked 0 Times in 0 Posts

    Net radar DSP low k band

    NET RADAR DSP WITH ALP
    When used, the results were impressive but there was only one problem
    ,;The results were weaker than the other machines by a large margin even with the back monitoring was able to determine the distance between the other devices could not
    WITH LOW K BAND
    When the BAND is confined
    24000 TO 24050
    not recognize them among the other devices were able to identify this BAND and was alerted to them
    There have been more than a dozen radars carrying this wave but could not recognize it when it is confined to the range mentioned
    You've always come across an integrated device that does not need other devices

  2. #2
    Moderator winterbrew's Avatar
    Join Date
    Nov 2013
    Location
    Western Australia
    Posts
    2,024
    Thanks Given
    2,217
    Thanked 1,956 Times in 1,042 Posts
    NetRadar DSP is based on the Attowave DSP platform (same as Uniden R3). Due to hardware limitations, it cannot scan below 24.050 GHz on K band.

    The new Uniden R7 removes this limitation.

    The Radenso RC-M / Pro M or Genevo Pro M / One M also scan down to the lower K band range (23.950 GHz), as do may Escort products, along with the later firmware V1's
    Last edited by winterbrew; 01-26-2019 at 08:32 AM.
    2 x ALPriority (Quint) with STi-R+ and BT/HiFi/GPS integration | V1C (sold) | Bel RX65 S7 | 2015 Intl Redline Pro-A (sold) | Uniden R3 | Uniden LRD950 (sold) | Stalker Lidar | UltraLyte LRB | Kustom Raptor RP-1 2 x K band, 1 x Ka band antennas | Decatur Genesis-II K band |

  3. #3
    Junior Member
    Join Date
    Dec 2018
    Posts
    4
    Thanks Given
    0
    Thanked 0 Times in 0 Posts
    Name:  Screenshot_20190127_143215_com.android.chrome.jpg
Views: 220
Size:  150.5 KB
    But according to the settings of the net radar it monitors this frequency but I think here is wrong in the update or just needs to adjust according to the settings shown in the options of the frequency

  4. #4
    Junior Member
    Join Date
    Dec 2018
    Posts
    4
    Thanks Given
    0
    Thanked 0 Times in 0 Posts
    Name:  Screenshot_20190127_143215_com.android.chrome.jpg
Views: 220
Size:  150.5 KB
    But according to the settings of the net radar it monitors this frequency but I think here is wrong in the update or just needs to adjust according to the settings shown in the options of the frequency

  5. #5
    Moderator winterbrew's Avatar
    Join Date
    Nov 2013
    Location
    Western Australia
    Posts
    2,024
    Thanks Given
    2,217
    Thanked 1,956 Times in 1,042 Posts
    Yes, I've seen the settings before.

    The FCC test report says 24.050 - 24.250 GHz on K band;

    https://fccid.io/2AHMC-NR-DSP/Test-R...Report-3483363

    As far as I'm aware, there were never any 'international' models developed for the overseas market, with different frequency ranges
    Last edited by winterbrew; 01-27-2019 at 06:41 PM.
    2 x ALPriority (Quint) with STi-R+ and BT/HiFi/GPS integration | V1C (sold) | Bel RX65 S7 | 2015 Intl Redline Pro-A (sold) | Uniden R3 | Uniden LRD950 (sold) | Stalker Lidar | UltraLyte LRB | Kustom Raptor RP-1 2 x K band, 1 x Ka band antennas | Decatur Genesis-II K band |

  6. #6
    Senior Member BestRadarDetectors's Avatar
    Join Date
    Oct 2013
    Location
    NJ
    Posts
    6,096
    Thanks Given
    712
    Thanked 7,397 Times in 2,866 Posts
    NR does not scan lower that 24.050. The K Band ALP muting segment's were when we used old Sti-R M international antennas.

    Sent from my SM-N960U using Tapatalk
    Need Help Choosing a Radar Detector for your needs? Visit our website: http://www.bestradardetectors.net, Send us a PM or call us at 1-888-229-7594
    Before looking at an Escort Radar Detector you should really check out Uniden Detectors.. Uniden R1 & R3 are the best performing radar detectors for the money.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •