Solid green LED

[BestRadarDetectors]

BRD, do you think a failing F1 sensor can cause my solid green? It happened again today twice. First after work it went green on start up for 15 minutes, then went into defense mode. That was after sitting parked and unpowered for 9 hours. Then I stopped at a store, started back up and got green for about 5 minutes, then it went into defense mode.

We have already told you what to do to troubleshoot your issue. If the system does not boot disconnect one sensor at a time to determine which line if causing an issue. Once you determine which line it is disconnect the sensor at the quick disconnect connector and plug into another sensors wire and that will tell you if you have an issue with a head or the wire. I am not sure why you are making things more complicated.

[jccr413]

You will fry the head if you plug in into a system that is not an ALP.

Perfect won't be trying that any time soon lol.

Thanks for the advise


Sent from my iPhone using Tapatalk

[jccr413]

@BestRadarDetectors do you happen to have a coupon code?! So I can purchase a one head system?


Sent from my iPhone using Tapatalk

[BestRadarDetectors]

@BestRadarDetectors do you happen to have a coupon code?! So I can purchase a one head system?


Sent from my iPhone using Tapatalk

No sorry. There are no active promotions.

Sent from my SM-G935T using Tapatalk

[System]

You will fry the head if you plug in into a system that is not an ALP.

LOL I've always been kinda curious what would happen if you plugged different sensors into another manufacturers CPU... I definitely won't be trying this any time soon

[geiz]

We have already told you what to do to troubleshoot your issue. If the system does not boot disconnect one sensor at a time to determine which line if causing an issue. Once you determine which line it is disconnect the sensor at the quick disconnect connector and plug into another sensors wire and that will tell you if you have an issue with a head or the wire. I am not sure why you are making things more complicated.

First time you told me this, or replied to me at all. I think you have me confused with someone else.

I'll just send my F1 sensor back to ALP, pretty sure it is bad. Then see if the green LED returns.

[geiz]

First time you told me this, or replied to me at all. I think you have me confused with someone else.

I'll just send my F1 sensor back to ALP, pretty sure it is bad. Then see if the green LED returns.

One thing I failed to mention is that I swapped the F! and F2 connections at the control box and the error message switched to F2 sensor fail. Pretty sure it is the sensor. Just wanted to know if the failed sensor could cause the booting up to green LED problem, or if it could be another issue, before I sent the F1 sensor back to ALP.

[Holla]

If you unplug F1 does your system boot right up to Blue??

[geiz]

If you unplug F1 does your system boot right up to Blue??

Hi Holla,

Yep, it boots right up to blue with F! disconnected. That sensor will be in the mail back to ALP tomorrow.

Once I get this resolved, I'd love to check the replacement out with your assistance. Actually was thinking that was a pretty idea anyway, even without this sensor problem. Been 2 years since we tested with your gun.

[Holla]

Hi Holla,

Yep, it boots right up to blue with F! disconnected. That sensor will be in the mail back to ALP tomorrow.

Once I get this resolved, I'd love to check the replacement out with your assistance. Actually was thinking that was a pretty idea anyway, even without this sensor problem. Been 2 years since we tested with your gun.

I Dont recognize the screen name! Blue Golf??

Yep #1 sensor is bad for sure!